Solid red oak church doors 1 3/4" thick. All mouldings and
curved parts where cut on the router with standard tooling.
Church Door Detail
All mouldings and curved parts where cut on the router with
standard tooling.
Spinning Wheel Flyer
Baltic birch 3/4" thick. Most drilling and the outline cutting is done
on the router. The customer provided an AutoCAD 2D drawing of this part.
Spinning Wheel Flyer
Yellow poplar 1 1/2" thick. Outline cutting is done on the
router.
RC Model Glider Parts
These wing parts are cut in 4mm thick aircraft grade birch plywood. The parts are held in the sheet with customizable tabs.
RC Model Glider Parts
These parts are cut in 4mm thick aircraft grade birch plywood. Notice how parts are nested inside of other parts to maximize material usage.
Shoe Bench
Maple plywood and solid maple bench. All plywood parts and their joinery where cut
on the router.
Photo courtesy of Blue Bear Home Decor.
Maple Bench
Solid maple bench. The mortises for the slats and the seat outline was cut on the router. Cutting time was about 5 minutes.
Photo courtesy of Blue Bear Home Decor.
Trundle Bed
This wave was cut out of 3/4" MDF from an AutoCAD 2D drawing.
Photo courtesy of Blue Bear Home Decor.
Rosette
This rosette was cut from 1" solid poplar with standard tooling. An AutoCAD 2D drawing was created to
match the profile of the customer provided sample. Machining took about 6 minutes.
